CB750PartsDepot.com

"Haynes" Service Manual - covers CB750-CB900 '78-'84

3-Jaw Oil Filter Wrench- Use to remove Spin-on type Oil Filters

Range from 2 1/2" to 3 3/4" (63.5mm-95mm) Use 3/8" Drive Tool

#35-9022

20mm. wide (.79") Stainless Steel Gasket Scraper Knife, High Grade Wooden Grip

3.33 oz. (75 ml) tube of Autosol Metal Polish. Cleans, polishes, protects and removes corrosion. For all metal parts-chrome, brass, copper, nickel, stainless steel and aluminum. Made in Germany since 1929.

"Tuck Away" 12mm. Spark Plug Wrench for CB750

4 Gauge Carburator Synchronizer

Click on Image for Complete Description

Cylinder compression Tester with quick coupling, universal adapter and flex hose with 14mm. threaded end.

Cylinder Compression Tester set with quick coupling and release valve. Includes adapters to fit 10, 12, 14, and 18mm. Spark plug holes.

Gasket Cement - 3-Bond #4 - 100gram tube - Gray semi-drying type. Use on gaskets except head gasket and on all surfaces without gaskets

15mm wide (9/16") Stainless Steel Gasket Scraper Knife

#35-8002

30mm. wide (1.19") Stainless Steel Gasket Scraper Knife, High Grade Wooden Grip

#35-8004

Feeler Gauge Set- Metric Feeler Gauge Set for setting valve and contact point clearances. 20pc. Set (marked in metric sizes only).

     Click on Image for Full Description of Sizes

Feeler Guage Set - Metric/Inch Feeler Gauge Set for setting valve and contact point clearances. 32pc. Set       Click on Image for Complete Description of Sizes

CB750/900 Valve Shim Tool also for Honda CBX models

Permatex Valve Lapping Paste

Valve Lapping Stick- has 5/8" and 13/16" Diameter Cups

Valve Spring Compressor - Large Honda heavy duty type.

Valve Spring Compressor Tool in case High quality professional tool to remove valve springs. Now with 5 Tips! - 16, 19, 23, 25 and 30mm. Dia.

Piston Pin Puller

Cam Chain Tool Kit in case - a "must have" tool to Break and Rivet cam chains. Note: Do Not use for rear drive chains.

Replacement Breaker Pin for Cam chain breaker tool 35-0112.

Flywheel Puller (male) 18mm x 1.5 Roght hand thread: Fits CB750(79-82), CB900, CB1000, CB1100

Professional adjustable vise grip style clutch basket and sprocket holder tool.

Chain Press Tool Used to press on sideplates (rivet or clip type) onto rear drive chains. Most late type High strength drive chains now use a press on sideplate on the connecting link ( including IZUMI 530 HT ).

#35-0081

Chain Puller Tool, Pulls New Rear Drive Chain ends together so that the joiner link can be slipped in place. Ideal for new chains that are difficult to get together for the first time.

Drive Chain Breaker Tool.

5pc. Hook and Pick set with MAGNET in handle end.

30mm. Diameter inspection mirror on telescoping wand 7-20" range

29" Long Flex Rod with lighted magnetic Tip.

Compact LED flashlight with 5" long flexable lighted tip. Low power draw LED bulb provides a bright beam and long battery life from one AAA battery (Not included).

Metric Tap and Die Set in storage case

Thread Pitch Gauge for measuring Metric thread pitch (threads per millimeter). A very useful tool to identify the many various fastener metric threads. Gauge has the following sizes - 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.25, 1.75, 2.7, 2.8.

5pc. Screw Extractor Set - used to remove broken off studs, bolts, and screws. Set includes sizes - 1/8", 3/16", 15/64", 5/16", and 3/8"

Metric Pin Punch Set Set includes small sizes usually not available: 1.5mm, 2.0 mm, 3.0 mm, 4.0 mm, 5.0 mm, 5.5 mm, 6.0 mm, and 8.0 mm in storage case

Impact Screwdriver with bit set in case. A must have tool used to break loose engine screws with slot or phillips heads.

Replacement Driver Bit Set ( 3" Long ) - Set contains 2 Phillips and 2 Slotted impact driver Bits.

Replacement Driver Bit Set (1.5" Long) - Set contains 2 Phillips + 2 Slotted impact driver Bits.

Precision Angle Driver /Carb Adjuster

Snap ring Plier Set - Removes internal or external snap rings. Set includes 2 straight and 2 angled tips.

Right Angled Snap ring Plier Set

Spring Puller Tool - Used to Pull Side Stand Springs and Hook them into place

Brake Caliper Piston Holding/Detaching Tool. Grabs Brake Caliper Pistons Internally  so seized pistons can be worked loose from the caliper.

Fits: Caliper Pistons #29-0513 and 29-0514

High Quality Vacuum Brake Bleeder Tool suitable for motorcycle use. All metal construction. This is the best way to get the job done quickly. Note: Do not use this tool with Speed bleeders.

Strap Wrench with rubberized strap for good grip. Fits: 29-160mm. (1 1/8" - 6 1/4" diameters) Ideal for holding fork tubes and other round smooth shapes

Digital Tire Pressure Guage LCD Display. 1-100 PSI

Tire Lever - 16" long Dunlop type - For those tough tires needing lots of leverage to remove. You need 2-3 of these to do the job!

Rim Savers Set Designed to protect rims from damage caused by tire Irons when installing tires on rims.

Spoke Wrench Set - A must have for lacing, truing + tightening spokes. 2 Pc. Set - Fits: #8,9,10 and 11 nipple sizes.

Tool for installing and removing spoke or mag type wheel weights

1000cc Graduated Cylinder for accurate measuring of fluids.

250cc Graduated Cylinder for accurate measuring of fork oil and other fluids.

500cc Graduated Cylinder for accurate measuring of fork oils and other fluids.

Fork Oil Level Gauge

Inductive Xenon Timing Light. Operates from 12Volt Battery Power. The only accurate way to check your DOHC's Timing and check advance

LED Charging system indicator Gauge

Deluxe 12 Volt Battery Charger for AGM (Absorbed Glass Mat), Maintenance free

Click on Image for Full Description

100 Amp Battery Cables (8' Long) with alligator clips - For Motorcycle use.

Cable Luber - Universal pressure type (Sold each) Water, dirt are blown down cable by lubricant when pressure spray can nozzle is applied. Spray lube sold by most bike shops.

Electric Circuit Tester - Checks all motorcycle primary electrical and computer circuits for power. Plastic handle lights up if circuit is good. Icepick type probe and 48" cable with insulated alligator clips.

Electrical Continuity Tester (use with power off) - Detects open circuit in fuses,diodes, switches, sockets and wires (requires one AA battery - Not included). Long 48" leads.

8 pc. Driver Set for Allen Socket Screw

Metric 10pc. T-Handle Nut Driver Set

Metric Go Thru Socket Set

Terminal crimper tool, fastens metric terminals to wires. Professional Crimps like factory originals. 

1/2" Drive 27mm. 6 point deep Socket.

27mm. Box Wrench . Long (15") type for leverage to loosen bolts.